The building integrated wiring system is a better fit and kingdom International, national standard, the high performance wiring six wiring system

The whole system from the equipment room, from the trunk to administrative levels to all parts of all working until the system adopts the resistance of WESTERN NEVADA's company (warrants) 6 products. Complies with ISO11801, TIA/EIA for EN50173, and the requirement of the specifications and standards of performance than standard requirement.

Main USES star network structure, satisfy the demand. Flexible network

(1) using star network structure, easy maintenance management of single point of failure will not affect the other points, partial failure does not affect the overall.
(2) using star can support multiple computer network structure, convenient and fast Ethernet network protocol, ATM and FDDI, application and upgrading.
(3) change the position information points, mobile, need only in the corresponding hall between wiring do simple jumpers, don't need to laying cables and install socket panel.

Open, modular structure system, flexible extension performance

(1) open structure system can provide more support systems.
(2) modular structure system with flexible extension performance, users can easily without decreasing the original system based on the performance of this system can be easily extended to add equipment, can adapt the customer expansion adding information points to the needs of the development of technology and the future.

Support various network connections

Support multiple networking system, EIA - 232 - D, IEE802.3, IBM3270 / AS400, FDDI, ATM, 622M 155M/is the maximum distance that 10base-t, 100BASE - T, 100BASE - T, 1000BASE - SX, 1000BASE - LX and is 100 gold Ethernet

Quality assurance

Provide quality products and systems for application

6 class wiring system products usually divided into component class products and channel products. Channel products usually adopts all devices connected to standard test, product channel again, and less residual properties required of all poor compatibility, using device configuration of the factory, cannot replace other brand, installation requires special strictly.
The test principle is: device performance is good or bad, some reach six classes, some don't reach, but can reach 6 class average channel field test index. Components products testing methods are all components individually, regardless of each test, test, and achieve the highest standard component index of all devices that all alone, so the test requirements of surplus high performance, compatibility is very good.
American trillion kay 6 products is completely components, its product performance level product is very big, test bandwidth allowance of 300MHz above, and compatibility is very good, can resist the performance construction site. Reflect on products have different features:

cable
True 6 class cable should be with the skeleton, among the skeleton can effectively improve the crosstalk between the lines of the into whatever (or distal), more than crosstalk
Is greatly improved. 6 the product Kathleen signs with cross isolation for cable 23AWG cable, its crosstalk index and attenuation index allowance is very big.
Features:
1, especially the isolation
2 and extremely strict concentricity, achieve 99.5%
3 and flawless layer
4 and the slight changes TongXin diameter, achieve ± 3 Ω impedance and perfect structure to damage
4 for six FSTP double shielding/SSTP double shielded twisted-pair cable is high speed, high performance, and its excellent 100ohm cables link performance guarantee multiple identical or compatible signal can share the same cable without damaging the integrity of the data. The cable to support good high-speed transmission rate, 155MbpsATM asynchronous transfer mode (up), fast Ethernet and gigabit Ethernet 100BaseT and support multiple ATM signal and other compatible for simultaneous transmission signal by single membrane shielding and weaving shielding can anti-electromagnetism interference/rfi, cable maintain a perfect data transmission performance.
The six categories of 4 to FSTP double shielding/SSTP double shielded twisted-pair cable with even more than IS11801 ISO/IEC (1995) and the EIA/TIA for 2 and EN50173 CENELEC FSTP six types of double standards about shielding/SSTP double shielding twisted-pair cable standard attenuation and proximal crosstalk requirements. In addition, the cable is American electrical quality standards (UL authentication of six types of cable) and fits UL CM level. According to client needs, providing group (CMR OFNR/level. The detailed specification on cable OMNI - asp.net, please refer to information cable.

Size: 23AWG DE
weight: + / - 18kg / 1000ft (box),
8 mm in diameter, external:
Treatment: mm, insulation thickness
Van sheath thickness: 0.68 mm
working temperature range: - 20 and 60 degrees
Maximum tension, 12kg:
Shield structure: overall membrane shielding and shielding of each film screen mesh overall nets shielding

Nominal rate: 0.7
Largest dc resistance: 145ohmp/km
Tributary resistance value: < 0.5% imbalance
Under 46pf capacitance: each 1Khz/m
Impedance: 100ohm + / - 15%
Maximum capacitance unbalance value: < 500pf/m
772khz under 1.8 db attenuation: (25) / 100m
Under the 1Mhz attenuation: 2.1 db / 100m (25)
FSTP and SSTP cable USES for low smoke, non-halogen - retardant sheath.
Cable package boxes in 1,000 feet of portable pull box, and ask for 500m installed dish.

UL hat, patent products to satisfy the FCC part, meet the EIA/TIA TSB - 40 - A, for 2 six types of transmission bandwidth than 250Mhz full performance
Foot six types of standard of all application support, support the transmission, the next generation gigabit network components and products IDC connector don't need to be stripped wire skins.

At least 75 times in life: repeat inserted plug/socket, By using FCC contact force plug minimum is 100 gold,
Plug retention: minimum 30Lbs
Temperature: - 40-150 degrees Fahrenheit (40-66 degrees Celsius) -,

Packaging: plastic, high impact resistance; UL94V 0 -
Insert needle: 100 mu nickel plated for bottom, 50 mu,
Fitting: insulation displacement connection (IDC) can end up (22), (24), (26) AWG cable.

At least 75 times in life: repeat inserted
Plug and socket contact force at least is 100 gold /; keeping plugs At least 133N
Working temperature range: 0-60 ° c
Storage temperature range, 40-66 degrees. -
Humidity: 5% - 95%) (without condensation,
Height: 24 4.38 mouth cm
Width: 48.26 cm or 19 "
Depth: 4.06 cm